Description
Home Assistant Connect ZWA-2 – the ultimate Z-Wave adapter for Home Assistant
Home Assistant Connect ZWA-2 is one of the best-performing Z-Wave adapters available and the best way to connect any Z-Wave device to Home Assistant. The antenna and base are precisely tuned to the ideal Z-Wave wavelength and work together for a reliable connection and maximum range.
With support for Z-Wave Long Range*, it offers a more secure and faster connection to distant devices and better battery life. It is designed by the team that develops Home Assistant and Z-Wave JS, with plug-and-play installation and effortless migration.
*Z-Wave Long Range is currently available only in the North America and Europe regions, with a limited number of devices in Europe.
Note: Connect ZWA-2 is designed to work with Home Assistant and the Z-Wave JS add-on. For use without Home Assistant, see the Nabu Casa guide.
Learn more on the manufacturer's website
Key features
- Precision engineering – the antenna and base are tuned to the ideal Z-Wave wavelength, for a reliable connection and maximum range.
- The latest Z-Wave chipset – certified, with an 800 series chipset, compatible with all Z-Wave devices.
- All the benefits of Z-Wave – while Zigbee, Wi-Fi and Bluetooth share the same band, Z-Wave has its own frequency, which passes through thick walls better, with less interference.
- Long Range compatible – more stable and faster connections to very distant devices and better battery life*.
- Built for Home Assistant – designed by the team that develops Home Assistant and Z-Wave JS.
- Effortless migration – switching from most other adapters takes just a few clicks.
- Plug and play – intuitive setup wizard and one-click firmware updates.
- More range, more options – a letterbox sensor in a block of flats or a motorised gate at the end of the drive become easy to automate.
- 2nd-generation platform – built on the second generation of the Home Assistant Connect platform (hence the “2”), powerful and open.
- Designed for the home – injection-moulded enclosure, clean lines; it looks like a candle and even lights up like one.
- Mesh repeater (experimental) – with experimental firmware, the ZWA-2 becomes a repeater and improves the responsiveness of distant devices.
- Network connection (experimental) – you can use the ZWA-2 anywhere in your home, via the built-in Wi-Fi or a PoE adapter (sold separately).
What's in the box
- Antenna
- Base
- 1,5 m USB cable (USB 2.0/3.0)
- Quick start guide
Practical use cases
- Automating a home with thick walls or a concrete structure, where the Z-Wave signal penetrates better than Zigbee or Wi-Fi.
- Control of devices far from the house (garage door, letterbox) via Z-Wave Long Range.
- Migrating from an older Z-Wave controller while keeping all devices already paired.
- Placing the adapter at the centre of the home, via Wi-Fi or PoE (experimental), even if the Home Assistant server sits in a network cabinet.
Technical specifications
| Model | NC-ZWA-9734 |
| Chipset | Silicon Labs ZG23 (Z-Wave 800 series); ESP32-S3 (USB-serial bridge) |
| Power and data | USB-C, 5 V DC, 1 A |
| Protocols | Z-Wave 800 and older (including Z-Wave Plus and Plus V2), Z-Wave Long Range (EU and US only) |
| Supported features | Security 2 (S2), SmartStart, OTA and OTW firmware updates; Z-Wave repeater and Portable Z-Wave (Wi-Fi/PoE) via experimental firmware |
| Regions | All Z-Wave regions, including US, EU and AU; Long Range US and EU only |
| Frequencies | 860–930 MHz; EU: 868,4/869,85 MHz (mesh), 864,0/866,0 MHz (LR); US: 908,42/916 MHz (mesh), 912/920 MHz (LR); AU: 919,8/921,4 MHz |
| Antenna | Peak gain 3,38 dBi, omnidirectional |
| Long Range coverage | Up to 1,5 km line of sight, with no obstacles (Nabu Casa test); actual range depends on the building and placement |
| Dimensions / weight | 125 x 125 x 315 mm, 350 g; packaged 345 x 222 x 45 mm, 600 g |
| Enclosure | Polycarbonate, white and semi-transparent |
| Operating conditions | Indoor use only, 0–65 °C, non-condensing humidity |
| Certifications | CE, FCC, RCM |
Home Assistant Connect ZWA-2 is the right choice for anyone who needs a stable Z-Wave network with extended coverage and Long Range support, natively integrated into Home Assistant.
Frequently asked questions
Does it run Z-Wave and Z-Wave Long Range at the same time?
Yes. Long Range forms a separate star-topology network that runs simultaneously with the classic Z-Wave mesh network.
How should I position it?
Upright, away from obstacles that block the signal. Do not lay it flat or mount it sideways on a wall; an internal accelerometer signals an unsuitable position via the LED.
Does it work without Home Assistant?
It is designed for Home Assistant and Z-Wave JS. For other platforms, Nabu Casa has a dedicated guide, mentioned above.
