Description
TP-Link POE20E-Outdoor - 2-Port Gigabit Outdoor PoE+ Extender
The TP-Link POE20E-Outdoor is an outdoor PoE+ extender designed to extend the transmission distance of PoE power and data beyond the standard limit of 100 metres of an Ethernet cable. With 2 Gigabit ports (10/100/1000Mbps) and compatibility with the IEEE 802.3af/at standards, the device is installed between the PoE source and the end device to extend network coverage.
Being intended for outdoor mounting, the POE20E-Outdoor is built for video surveillance installations or access points located far from the main switch, where a standard Ethernet cable could not reliably carry the signal and power.
Key features:
- 2 Gigabit ports (10/100/1000Mbps)
- Compatible with the 802.3af/at PoE standards
- Extends PoE transmission distance beyond the standard limit of 100 metres
- Built for outdoor mounting
- Simple installation between the PoE source and the end device
By placing a POE20E-Outdoor extender halfway along the distance, the coverage range of a PoE network can practically be doubled, without having to install an additional switch or a separate power supply at the far end.
Practical use cases:
- Extending PoE power to a surveillance camera located more than 100 metres from the switch
- Connecting an outdoor Wi-Fi access point located far from the equipment room
- Extending the PoE network across an industrial or agricultural complex with long distances between buildings
The TP-Link POE20E-Outdoor is the right accessory for outdoor PoE installations that exceed the standard distance limits of an Ethernet cable.
Technical specifications:
| Ports | 2x 10/100/1000 Mbps RJ45 |
| PoE standard | IEEE 802.3af/at (PoE+) |
| Power delivered | up to 30 W |
| Protection | IP68 (dust/water), 6kV surge protection |
| Operating temperature | -40 C ~ 65 C |
| Extended distance | +100 m at full Gigabit speed, up to 250 m at reduced speeds |
| Installation | Plug-and-Play, no configuration, outdoor mounting |
