Description
Shelly Pro 3EM 120A v2 is the professional three-phase energy meter from the Pro series, in revision v2, supplied with three 120 A current transformers. It mounts on a DIN rail in the electrical panel and measures in real time the voltage, current, active and apparent power, power factor and energy on each phase, plus the neutral current.
Metering is done in four quadrants, so the device tracks both the energy drawn from the grid and the energy fed back into the grid - which is why it is ready for photovoltaic installations. Measurement accuracy is 1%, and for active energy the meter meets accuracy class B according to IEC 62053-21, based on the manufacturer's testing.
Revision v2 can be upgraded to Matter through a firmware update and communicates via Ethernet, Wi-Fi and Bluetooth, with support for MQTT, HTTP, WebSocket and scripts run locally on the device. Note: the meter has no built-in relay, and a contactor is controlled with the dedicated Shelly Pro 3EM Switch Add-on.
Features
- Metering on 3 phases plus neutral, up to 120 A per channel, with the three current transformers included in the pack
- 4-quadrant metering, ready for photovoltaic systems and prosumers
- Accuracy class B for active energy (IEC 62053-21), 1% measurement error
- Upgradable to Matter through a firmware update
- Optional phase sequence error detection
- Optical pulse indicator for consumed energy
- Non-volatile internal memory, with at least 45 days of data at 1-minute intervals
- Internal real-time clock that keeps timestamps correct even without an internet connection
- Ethernet (RJ45), Wi-Fi 802.11 b/g/n and Bluetooth connectivity, each of which can be enabled separately
- MQTT, HTTP, WebSocket, scripts and 20 webhooks (5 addresses per webhook)
- Internal temperature sensor and DIN rail mounting
- Data export in CSV and JSON format via RPC
Practical use cases
- On the main panel of a house with a three-phase connection, it shows in real time how much each phase draws, so large loads (water heater, heat pump, car charging station) can be balanced between phases and no longer trip the main breaker.
- In an installation with photovoltaic panels, 4-quadrant metering separates the energy taken from the grid from the energy fed in, so you can check monthly how much was produced and how much was delivered to the grid, independently of the inverter data.
- In a small commercial space - practice, workshop, laundromat - the local log of at least 45 days at one-minute intervals makes it possible to reconstruct a consumption peak and identify the machine responsible, even if the internet was down that day.
- Together with the Shelly Pro 3EM Switch Add-on and a contactor, it can switch on a large load by itself, for example the water heater, only during periods of photovoltaic production or reduced tariff, via a script run locally on the device.
Technical specifications
| Model | SPEM-003CEBEU |
| Type | Three-phase energy meter, DIN rail mounting |
| Measured phases | 3 phases + neutral |
| Current transformers included | 3 x CT 120 A |
| Measured current | 0 - 120 A per channel, via current transformer |
| Current accuracy | ±1% (2 - 120 A), ±2% (1 - 2 A), ±5% (0 - 1 A) |
| Measured voltage | 100 - 260 V, ±1% accuracy |
| Accuracy class | Class B, active energy (IEC 62053-21) |
| Power supply | 100 - 260 V AC, 50/60 Hz |
| Self-consumption | Below 3 W |
| Recommended external protection | B or C curve, max. 16 A, min. 6 kA |
| Zero-load threshold | 30 VA per channel |
| Inter-channel calibration | Minimum 500 W per channel |
| Data memory | At least 45 days, 1-minute resolution |
| Data export | CSV and JSON via RPC |
| Connectivity | Ethernet RJ45, Wi-Fi 802.11 b/g/n, Bluetooth 4.2 |
| Radio band | 2400 - 2495 MHz, below 20 dBm |
| Processor | ESP32-D0WDQ6, 16 MB flash memory |
| Scripts / MQTT / CoAP | Yes / Yes / No |
| Built-in relay | No - contactor control via Shelly Pro 3EM Switch Add-on |
| Dimensions (H x W x D) | 94 x 19 x 69 mm |
| Weight | 62 g |
| Conductor cross-section | 0,5 - 2,5 mm², max. torque 0,4 Nm |
| Operating temperature | -20 °C ... 40 °C |
| Humidity | 30% ... 70% RH |
Shelly Pro 3EM 120A v2 is the right choice for anyone with a three-phase installation or a photovoltaic system who wants accurate consumption data for each phase, straight from the electrical panel.
