Zigbee module Sonoff MINI-ZBD Dry Contact, AC/DC power supply, for automating garage doors, gates, boilers or motors, Zigbee 3.0 compatible, Alexa/Google Assistant

Sonoff
RON 79.55 (VAT included)
RON 65.74 (VAT excluded)
shipping cost is not included
Sonoff
Stock 834
Product code - SKU 6979033600713
EAN 6979033600713

Description

Sonoff MINI-ZBD is a Zigbee dry contact relay module, designed for controlling equipment that is started via a potential-free contact: garage doors, electric gates, boilers, water pumps or alarm systems. The relay supports both modes, normally open (NO) and normally closed (NC), so it can be connected to the existing automation without modifying its wiring.

The module accepts dual power supply: 110-240V AC from the home installation or 12-48V DC, for low-voltage installations powered by batteries or solar panels, without additional converters. Via the Zigbee 3.0 protocol it can be controlled remotely, by voice command and through schedules from the eWeLink app or from platforms such as Home Assistant, and as a Zigbee router it extends the coverage of the mesh network.

Note: This product uses the Zigbee protocol and requires a compatible Zigbee hub/bridge (e.g. Sonoff ZBBridge-P / Sonoff ZBBridge-U / Sonoff ZBDongle-E / Sonoff Dongle-M) to be connected to the network and controlled from the app. It does not work on its own over WiFi.

Key Features & Technical Advantages

  • NO/NC dry contact: safe control of garage doors, boilers, electric gates, water pumps or alarm systems, without modifying the existing wiring.

  • AC or DC power: 110-240V AC or 12-48V DC, for classic household installations or low-voltage systems.

  • Control of small DC loads: controls DC motors and solenoid valves of up to 8W.

  • High-power extension via contactor: together with a contactor, it can control high-power equipment (air conditioners, large pumps, industrial lighting) using a low-power signal.

  • Zigbee router: works as a repeater in the Zigbee network, reducing areas without signal.

  • External switch input: accepts rocker switches or momentary switches (push button).

Ways to Use It and Scenarios

  1. Garage door or electric gate: connected to the control input of the automation, it allows opening from the app or by voice command (Alexa/Google Assistant), while keeping the existing button.

  2. Boiler: switching the boiler on and off via the thermostat contact, on a schedule or based on a Zigbee temperature sensor.

  3. Pumps and high-power equipment: via a contactor, it controls water pumps or other large loads with a low-power signal.

Package Contents

  • 1 × Sonoff MINI-ZBD Dry Contact module

  • 1 × Mounting bracket/clip (if applicable)

  • 1 × Quick start guide and electrical wiring diagram

Practical use cases

  • Controlling a 12/24V DC solenoid valve (up to 8W) for irrigation, with time-based scheduling from the app.
  • Used to automate a garage door, electric gates or boilers via a dry contact, without new wiring.
  • Integrated into a Zigbee network alongside other Sonoff sensors for fast local automations, with no dependence on the internet.

Technical specifications:

ModelSONOFF MINI-ZBD Dry Contact
TypeZigbee relay module with dry contact (NO/NC), for automations
Power supply110-240V AC or 12-48V DC (dual)
Compatible loadDC motors/solenoid valves up to 8W; 24V DC max. 2A (resistive load)
ProtocolZigbee 3.0, also works as a Zigbee router
RequiresZigbee gateway/hub (no built-in WiFi)
Dimensions41 x 43 x 21.5 mm
Weight35.3g
Operating temperature-10C ~ 40C
Operating humidity5-95% RH, non-condensing
Housing materialPC
External switch inputrocker or momentary (push button)
Intended useautomation of garage doors, gates, heating boilers or motors
CompatibilityAmazon Alexa, Google Assistant (via Sonoff gateway + eWeLink)

The Sonoff MINI-ZBD Dry Contact Zigbee module, AC/DC powered, for automating a garage door, gate, boiler or motor, Zigbee 3.0 compatible, Alexa/Google Assistant, is the ideal choice for anyone who wants to automate existing equipment via a dry contact, without additional wiring work.

Frequently asked questions

Which protocol does it use and does it require a hub?

Zigbee 3.0, so it needs a Zigbee gateway: Sonoff ZBBridge, NSPanel Pro, iHost or a ZBDongle-E/ZBDongle-P stick, among others. It also works as a Zigbee router, extending the network.

How is it powered? Does it require a neutral?

At 100-240 V~ (with live and neutral) or at 12-48 V⎓. Do not connect AC and DC power at the same time.

What can it control?

It has an NO/NC dry contact output, rated at 24 V⎓, 2 A on a resistive load: suitable for controlling a gate, a garage door or a boiler, not for high-power 230 V loads.

Is it compatible with Home Assistant?

Yes, via compatible Zigbee coordinators (for example ZBDongle-E or ZBDongle-P) used in Home Assistant.

What customers are saying

Do you own or have used the product?
Post review